======Howto enable DEBUG mode======

=====I. Enable debug mode permanently=====

Edit the /etc/imscp/imscp.conf file and set the **DEBUG** parameter value to **1**.

=====II. Enable debug mode only for setup/update process=====

Execute the installer with the **--debug** command line option.

The logs in both cases should be in the folder /var/log/imscp/, since there are several modules, you will have to check various files.
Most of the information on failed upgrades/installs would be in those files.
  /var/log/imscp/imscp-setup.log
  /var/log/imscp/imscp-rqst-mngr.log