i-MSCP Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======Using reiserfs file system with i-MSCP======

In order, to use the reiserfs file system with i-MSCP, you must follow these steps:

Edit your **/etc/fstab** file to add the **attrs** option for your device. For instance:
<code>
UUID=74699091-3ab8-43f2-bdd5-d1d898ab50fd /               reiserfs notail          0       1
</code>

Must be updated to:
<code>
UUID=74699091-3ab8-43f2-bdd5-d1d898ab50fd /               reiserfs notail,attrs          0       1
</code>

Once you did this, you can remount your device. For instance:

<konsole root>
# mount -o remount /dev/disk/by-uuid/74699091-3ab8-43f2-bdd5-d1d898ab50fd
</konsole>

And then, normally you must be able to use i-MSCP without any trouble (a least with the immutable bit).

If needed, you can find the **uuid** of your device, with the following command:

<konsole root>
# blkid device
</konsole>

You must replace **device** by your device (such as /dev/sda1)

i-MSCP Documentation

User Tools

Site Tools

Page Tools