User Tools

Site Tools


enable_debug_mode

Howto enable DEBUG mode

I. Enable debug mode permanently

Edit the /etc/imscp/imscp.conf file and set the DEBUG parameter value to 1.

II. Enable debug mode only for setup/update process

Execute the installer with the –debug command line option.

The logs in both cases should be in the folder /var/log/imscp/, since there are several modules, you will have to check various files. Most of the information on failed upgrades/installs would be in those files.

/var/log/imscp/imscp-setup.log
/var/log/imscp/imscp-rqst-mngr.log
/var/www/virtual/i-mscp.net/wiki/htdocs/data/pages/enable_debug_mode.txt · Last modified: 2017/04/14 19:30 by nuxwin