i-MSCP Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======Howto enable DEBUG mode======

=====I. Enable debug mode permanently=====

Simply edit both the /etc/imscp/imscp.conf and the /etc/imscp/imscp.old.conf files and set the **DEBUG** parameter value to **1**.

=====II. Enable debug mode only for setup/update process=====

**For versions already released:**

Follow the procedure above and revert it back after.

**For master branch:**

Just run the script with the debug command line option. (type perl <scriptname> -?) for more information about available command line options.


The logs in both cases should be in the folder /var/log/imscp/, since there are several modules, you will have to check various files.
Most of the information on failed upgrades/installs would be in those files.
  /var/log/imscp/imscp-setup.log
  /var/log/imscp/imscp-rqst-mngr.log

i-MSCP Documentation

User Tools

Site Tools

Page Tools