User Tools

Site Tools


enable_debug_mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
enable_debug_mode [2013/04/10 07:41]
aseques
enable_debug_mode [2017/04/14 19:30] (current)
nuxwin
Line 3: Line 3:
 =====I. Enable debug mode permanently===== =====I. Enable debug mode permanently=====
  
-Simply edit both the /​etc/​imscp/​imscp.conf ​and the /​etc/​imscp/​imscp.old.conf files and set the **DEBUG** parameter value to **1**.+Edit the /​etc/​imscp/​imscp.conf ​file and set the **DEBUG** parameter value to **1**.
  
 =====II. Enable debug mode only for setup/​update process===== =====II. Enable debug mode only for setup/​update process=====
  
-**For versions already released:​** +Execute the installer with the **--debug** command line option.
- +
-Follow ​the procedure above and revert it back after. +
- +
-**For master branch:** +
- +
-Just run the script with the debug command line option. ​(type perl <​scriptname>​ -?) for more information about available command line options. +
  
 The logs in both cases should be in the folder /​var/​log/​imscp/,​ since there are several modules, you will have to check various files. The logs in both cases should be in the folder /​var/​log/​imscp/,​ since there are several modules, you will have to check various files.
/var/www/virtual/i-mscp.net/wiki/htdocs/data/pages/enable_debug_mode.txt · Last modified: 2017/04/14 19:30 by nuxwin