i-MSCP Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<markdown>
# i-MSCP Mailman plugin

Provides mailing-lists through GNU Mailman software.
</markdown>
<WRAP center round important 60%>
**Bear in mind that this documentation is for the last available version. If you use an older version, you must refer to the README.md file inside the plugin archive.**
</WRAP>
<markdown>
## Requirements

 - i-MSCP >= 1.4.x Serie

## Installation

1. Be sure that all requirements as stated in the requirements section are met
2. Upload the plugin through the plugin management interface
3. Install the plugin through the plugin management interface

Note that depending on your system, installation can take-up several minutes.
You must be a bit patient and never short-cirtuit the process.

### Default mailman list

The default `mailman` site list is automatically created with an auto-generated
password. That password is sent to the mail account of the i-MSCP master
administrator. The administrator can update password of the list through its
own mailman interface at `http(s)://<control_panel:port>/mailman` URL.

## Update

1. Be sure to read the update notes in the UPDATE.md file
2. Upload the plugin through the plugin management interface

Note that depending on your system, update can take-up several minutes. You
You must be a bit patient and never short-cirtuit the process.

## Plugin translation

You can translate this plugin using a gettext translation editor such as
`Poedit`. Translation files are located under the `./l10n` directory, inside of
the plugin archive. Once translated you can send us your translation file
(po file) for integration in future release.

Note that if no translation file exists for your localization in the
`./l10n/po` directory, you must create it first from the `l10n/Mailman.pot`
file. Be aware that your file must be `UTF-8`, else, it won't be accepted.

## Troubleshooting

### Couldn't create new list via control panel /mailman/create URL

If you're upgrading from an older version, the sitewide password could not
have been set yet. You can set the sitewide password as follow:

    # /usr/lib/mailman/bin/mmsitepass <yourpassword>

Once done, you should be able to create new lists through the `/mailman/create`
control panel URL.

### Couldn't write aliases.db or virtual-mailman.db errors

In some situations, permissions to those files could have been reseted. You can
set correct permissions as follow:

    # cd /var/lib/mailman/data
    # rm -f aliases* virtual-mailman*
    # touch aliases virtual-mailman 
    # postalias aliases
    # postmap virtual-mailman
    # chown list:list aliases* virtual-mailman* 
    # chmod 0664 aliases* virtual-mailman*

Once done, don't forget to regenerate alias entries as follow

    # sg list -c /usr/lib/mailman/bin/genaliases

See also [LP: 1696066](https://bugs.launchpad.net/mailman/+bug/1696066)

### Wrong URL in email notification of administrator lists

Because there is not way to setup different patterns for Mailman URL hosts, any
link appearing in administrator list email notifications will refers to control
panel URL without the port. There is two ways to solve the problem:

- Make use of the PanelRedirect plugin (not recommended)
- Setup the control panel hostname as customer domain (or subdomain), and
  enable the proxy feature as follow:
   - URL forwarding: Yes
   - Forward to URL: `http://<panel.domain.tld>:8880/` or
     `http://<panel.domain.tld>:8443/` if SSL is enabled for the control panel
   - Forward type: `PROXY` `Preserve Host`

By doing this, the control panel will be available on standard HTTP ports and
the problem of links in administrator list email notifications will be solved.

Note that for the second option, you need at least i-MSCP 1.4.4 version in
which a bug regarding the `redirect` feature has been fixed.

## Sponsors

 - IP-Projects GmbH & Co. KG - https://www.ip-projects.de
 - Retail Service Management - http://www.retailservicesystems.com

## License

    i-MSCP LetsEncrypt plugin

    @author Laurent Declercq <l.declercq@nuxwin.com>
    @copyright (C) 2013-2017 Laurent Declercq <l.declercq@nuxwin.com>
    @license i-MSCP License <https://www.i-mscp.net/license-agreement.html>

See the LICENSE file inside the archive for further details.
</markdown>
i-MSCP Documentation

User Tools

Site Tools

Page Tools
